Introduction

This vignette documents the use of the GFD function for the analysis of general factorial designs. The GFD function calculates the Wald-type statistic (WTS), the ANOVA-type statistic (ATS) and a permuted Wald-type statistic (WTPS). These test statistics can be used for general factorial designs (crossed or nested) with an arbitrary number of factors, unequal covariance matrices among groups and unbalanced data even for small sample sizes.

Data Example (crossed design)

For illustration purposes, we will use the data set pizza which is included in the GFD package. We first load the GFD package and the data set.

library(GFD)
data(pizza)

The objective of the study was to see how the delivery time in minutes would be affected by three different factors: whether thick or thin crust was ordered (factor A), whether Coke was ordered with the pizza or not (factor B), and whether or not garlic bread was ordered as a side (factor C).

head(pizza)
##   Crust Coke Bread Driver  Hour Delivery
## 1  thin  yes   yes      M 20.87       14
## 2 thick  yes    no      M 20.78       21
## 3  thin   no    no      M 20.75       18
## 4  thin   no   yes      F 20.60       17
## 5 thick   no    no      M 20.70       19
## 6 thick   no   yes      M 20.95       17

This is a three-way crossed design, where each factor has two levels. We will now analyze this design with the GFD function. The GFD function takes as arguments: * formula: A formula consisting of the outcome variable on the left hand side of a ~ operator and the factor variables of interest on the right hand side. An interaction term must be specified. * data: A data.frame, list or environment containing the variables in formula. * nperm: The number of permutations. Default value is 10000. * alpha: The significance level, default is 0.05. * CI.method: Specifies the method used for calculating the CIs, either t-quantile (default) or perm.

set.seed(1234)
model1 <- GFD(Delivery ~ Crust * Coke * Bread, data = pizza, nperm = 1000, alpha = 0.05)
summary(model1)
## Call: 
## Delivery ~ Crust * Coke * Bread
## 
## Descriptive:
##   Crust Coke Bread n Means Variances Lower 95 % CI Upper 95 % CI
## 1  thin   no    no 2  19.0       2.0      6.293795      31.70620
## 5  thin   no   yes 2  17.5       0.5     11.146898      23.85310
## 3  thin  yes    no 2  17.5       4.5     -1.559307      36.55931
## 7  thin  yes   yes 2  15.0       2.0      2.293795      27.70620
## 2 thick   no    no 2  19.5       0.5     13.146898      25.85310
## 6 thick   no   yes 2  18.0       2.0      5.293795      30.70620
## 4 thick  yes    no 2  21.5       0.5     15.146898      27.85310
## 8 thick  yes   yes 2  18.5       0.5     12.146898      24.85310
## 
## Wald-Type Statistic (WTS):
##                  Test statistic df      p-value p-value WTPS
## Crust                     11.56  1 0.0006738585        0.008
## Coke                       0.36  1 0.5485062355        0.570
## Crust:Coke                 6.76  1 0.0093223760        0.026
## Bread                     11.56  1 0.0006738585        0.015
## Crust:Bread                0.04  1 0.8414805811        0.818
## Coke:Bread                 1.00  1 0.3173105079        0.375
## Crust:Coke:Bread           0.04  1 0.8414805811        0.814
## 
## ANOVA-Type Statistic (ATS):
##                  Test statistic df1      df2    p-value
## Crust                     11.56   1 4.699248 0.02121110
## Coke                       0.36   1 4.699248 0.57625702
## Crust:Coke                 6.76   1 4.699248 0.05122842
## Bread                     11.56   1 4.699248 0.02121110
## Crust:Bread                0.04   1 4.699248 0.84984482
## Coke:Bread                 1.00   1 4.699248 0.36598284
## Crust:Coke:Bread           0.04   1 4.699248 0.84984482

The output consists of three parts: model1$Descriptive gives an overview of the descriptive statistics: The number of observations, mean and variance as well as confidence intervals (based on quantiles of the t-distribution or the permutation distribution) are displayed for each factor level combination. model1$WTS contains the results for the Wald-type test: The test statistic, degree of freedom and p-values based on the asymptotic \(\chi^2\) distribution and the permutation procedure, respectively, are displayed. Note that the \(\chi^2\) approximation is very liberal for small sample sizes and therefore the WTPS is recommended for such situations. Finally, model1$ATS contains the corresponding results based on the ATS. This test statistic tends to rather conservative decisions in the case of small sample sizes and is even asymptotically only an approximation, thus not providing an asymptotic level \(\alpha\) test.

We find a significant influence of the factors Crust and Bread. The WTS and WTPS also suggest a significant interaction between the factors Crust and Coke at 5% level, which is only borderline significant when using the ATS.

Data example (nested design)

Nested designs can also be analyzed using the GFD function. Note that in nested designs, the levels of the nested factor usually have the same labels for all levels of the main factor, i.e., for each level \(i=1, ..., a\) of the main factor A the nested factor levels are labeled as \(j=1, ..., b_i\). If the levels of the nested factor are named uniquely, this has to be specified by setting the parameter nested.levels.unique to TRUE. In this package, only analysis of balanced nested designs is possible, that is, the same number of levels of the nested factor for each level of the main factor.

We consider the data set curdies from the GFD package:

data("curdies")
set.seed(987)
nested <- GFD(dugesia ~ season + season:site, data = curdies, nested.levels.unique = TRUE)
summary(nested)
## Call: 
## dugesia ~ season + season:site
## 
## Descriptive:
##         season site n     Means  Variances Lower 95 % CI Upper 95 % CI
## 1 SUMMER          4 6 0.4190947  0.4615290   -0.29384911     1.1320385
## 2 SUMMER          5 6 0.2290862  0.3148830   -0.35979868     0.8179711
## 3 SUMMER          6 6 0.1942443  0.0729142   -0.08913091     0.4776195
## 4 WINTER          1 6 2.0494375  4.0647606   -0.06635610     4.1652311
## 5 WINTER          2 6 4.1819078 35.6801853   -2.08667494    10.4504905
## 6 WINTER          3 6 0.6782063  0.1910970    0.21944919     1.1369633
## 
## Wald-Type Statistic (WTS):
##             Test statistic df    p-value p-value WTPS
## season            5.415180  1 0.01996239       0.0000
## season:site       5.200991  4 0.26728919       0.3247
## 
## ANOVA-Type Statistic (ATS):
##             Test statistic      df1      df2    p-value
## season            5.415180 1.000000 6.447707 0.05593278
## season:site       1.382224 1.217424 6.447707 0.29278958

The aim of the study was to describe basic patterns of variation in a small flatworm, Dugesia, in the Curdies River, Western Victoria. Therefore, worms were sampled at two different seasons and three different sites within each season. For our analyses we consider both factors as fixed (e.g., some sites may only be accessed in summer). In this setting, both WTS and WTPS detect a significant influence of the season whereas the ATS, again, only shows a borderline significance at 5% level. The effect of the site is not significant.

Plotting

The GFD package is equipped with a plotting function, displaying the calculated means along with \((1-\alpha)\) confidence intervals. The plot function takes a GFD object as an argument. In addition, the factor of interest may be specified. If this argument is omitted in a two- or higher-way layout, the user is asked to specify the factor for plotting. Furthermore, additional graphical parameters can be used to customize the plots. The optional argument legendpos specifies the position of the legend in higher-way layouts.

plot(model1, factor = "Crust:Coke:Bread", legendpos = "center", main = "Delivery time of pizza", xlab = "Bread")

plot(model1, factor = "Crust:Coke", legendpos = "topleft", main = "Two-way interaction", xlab = "Coke", col = 3:5, pch = 17)

plot(nested, factor = "season:site", xlab = "site")

optional GUI

The GFD package is equipped with an optional graphical user interface, which is based on RGtk2. The GUI may be started in R (if RGtk2 is installed) using the command calculateGUI().

The user can specify the data location (either directly or via the “load data” button), the formula, the number of permutations and the significance level. Additionally, one can specify whether or not headers are included in the data file, and which separator (e.g., ‘,’ for *.csv files) and character symbols are used for decimals in the data file. The GUI also provides a plotting option, which generates a new window for specifying the factors to be plotted (in higher-way layouts) along with a few plotting parameters.