NAME Socket::More - Interface and scoped passive addressing routines SYNOPSIS Bring into your namespace. This overrides "socket" also: use v5.36; use Socket::More ":all"; Or import any of the functions by name: use v5.36; use Socket::More qw; Simple list of all interfaces: #List basic interface information on all available interfaces my @ifs=getifaddrs; say $_->{name} for @ifs; Flexible way to create interface scoped passive (listen) address across families. Special 'unix' interface for ease of use. All invalid combinations of family, port and paths are discarded: #Create passive (listening) sockets for selected interfaces my @passive=sockaddr_passive { interface=> ["eth0", "unix"], port=> [5566, 7788], path=> "path_to_sock" }; #All invalid family/interface/port/path combinations are filtered out #leaving only valid info for socket creation and binding: for(@passive){ say $_->{address}; socket my $socket, $_->{family}, $_->{type}, 0; bind $socket $_->{addr}; } DESCRIPTION This module makes it easier to generate the data structures to bind sockets on multiple addresses, socket types, and families (including unix) on a particular set of interfaces by name. It implements "sockaddr_passive", which facilitates solutions to requirements like these: 'listen on interfaces eth0 and eth1, using IPv6 and port numbers 9090 and 9091, but limit to link local addresses, and stream types'. 'listen on eth0 and unix, port 1000 and path test.sock, using datagram type sockets,'. 'listen on all interfaces on port 8080 and 8081, but only on link local ipv6 address' In order to achieve this, several 'inet.h' and similar routines are also implemented. This includes "getifaddrs", "if_nametoindex", "if_indextoname", "if_nameindex". To help support using this module in an application, address family and socket type support functions for string to constant mapping, constant to string mapping and command line parsing routines are also implemented. Please see the API section for a complete listing. No symbols are exported by default. All symbols can be exported with the ":all" tag or individually by name. MOTIVATION I wanted an easy way to listen on a particular interface ONLY. The normal way of wild card addresses "0.0.0.0" or "::", will listen on all interfaces. Any restrictions on connecting sockets will either need to be implemented in the firewall or in application code accepting and then closing the connection. This is a waste of resources and a potential security problem. Manually creating the multitude of potential addresses on the same interface (especially for IPv6) is a pain to maintain. This module reduces the effort by generating all combinations of parameters and then filters out what doesn't make sense and what you don't want API getifaddrs my @interfaces=getifaddrs; Queries the OS via "getifaddr" for the list of interfaces currently active. Returns a list of hash references representing the network interfaces. The keys of these hashes include: name The text name of the interface flags Flags set on the interface addr Packed sockaddr structure suitable for use with "bind" netmask Packed sockaddr structure of the netmask dstmask Packed sockaddr structure of the dstmask if_nametoindex my $index=if_nametoindex($name); Returns the index of an interface by name. If the interface is not found, returns 0 and sets $! with error code. if_indextoname my $name=if_indextoname($index); Returns the name of an interface by index. If the index does not represent an interface, "undef" is returned and sets $! with error code if_nameindex my @pairs=if_nameindex; Returns a list of key value pairs. The key is the interface index, and the value is the name of the interface. Return "undef" on error and sets $! with error code. family_to_string my $string=family_to_string($family); Returns a string label representing an address family $family. For example, calling with constant "AF_INET", will return a string "AF_INET" string_to_family my @family=string_to_family($pattern); Performs a match of all AF_.* names against $pattern. Returns a list of integer constants for the corresponding address family that matched. Returns an empty list if the patten/string does not match. The match is performed insensitive to case For example calling with "INET" will return a list of two elements, "AF_INET" and "AF_INET6". This is useful for handling address families supplied from the command line, as abbreviated names can be matched. sock_to_string my $string=sock_to_string($type); Returns a string label representing a socket type $type. For example, calling with the integer constant "SOCK_STREAM", will return a string "SOCK_STREAM" string_to_sock my @type=string_to_family($string); Performs a match of all SOCK_.* names against $pattern. Returns a list of integers for the corresponding socket types that matched. Returns an empty list if the patten/string does not match. The match is performed insensitive to case. For example calling with "STREAM" will return a list of one element, "SOCK_STREAM". This is useful for handling address families supplied from the command line, as abbreviated names can be matched. sockaddr_passive my @interfaces=sockadd_passive $specification; Returns a list of 'interface' structures (similar to getifaddr above) which provide meta data and packed address structures suitable for passive use (i.e bind) and matching the $specification. The resulting data is sorted by interface name, then but family and finally by type. It has some overlapping function of "getaddrinfo", however it is specifically for creating addresses for binding, allows the use of interface names and operates with UNIX domain configurations through a synthetic 'unix' interface. A specification hash has optional keys which dictate what addresses are generated and filtered: { interface=>"en", family=>"INET", port=>[1234] ... } The only required keys are "port" and/or "path". These are used in the address generation and not as a filter. Without at least one of these keys, no results will be generated. Other keys like "interface", "family" and "type" for example are used to restrict addresses created to the match Keys like "address" and "group" are a filter which are directly matched against the address and group. Keys themselves can be shortened all the way down to the shortest unique substring. So instead of 'interface', it could be 'inter', 'int' or just 'i' for example. This aids in usage from the command line. The shortest unique keys are: { i=>... #interface f=>... #family po=>... #port pa=>... #path a=>... #address t=>... #type g=>... #group } It can include the following keys: interface examples: interface=>"eth0" interface=>"eth\d*"; interface=>["eth0", "lo"]; interface=>"unix"; interface=>["unix", "lo"]; A string or array ref of strings which are used as regex to match interface names currently available. familiy examples: family=>AF_INET family=>[AF_INET, AF_INET6, AF_UNIX] A integer or array ref of integers representing the family type an interface supports. port examples: port=>55554 port=>[12345,12346] The ports used in generating a passive address. Only applied to AF_INET* families. Ignored for others. Either "port" or "path" are required, otherwise no addresses will be generated. path examples: path=>"path_to_socket.sock" path=>["path_to_socket1.sock", "path_to_socket2.sock"] The path used in generating a passive address. Only applied to AF_UNIX families. Ignored for others. Either "port" or "path" are required, otherwise no addresses will be generated. NOTE The actually path resulting from the specification will have a '_D' or '_S' appended to the path. This is done to ensure sockets of different type don't attempt to use the same path. address exmples: address=>"192\.168\.1\.1" address=>"169\.254\." As string used to match the textual representation of an address. In the special case of '0.0.0.0" or "::", any interface specification is ignored. group examples: group=>"PRIVATE' The group the address belongs to as per Net::IP data examples: data=>[$scalar] data=>[{ ca=>$ca_path, pkey=>$p_path}] A user field which will be included in each item in the output list. NOTE It is recommended this value is an array ref, wrapping actual data. This makes it more consistent when the data key is parsed from the command line parse_passive_spec my @spec=parse_passive_spec($string); Parses a concise string intended to be supplied as a command line argument. The string consists of one or more fields separated by commas. The fields are in key value pairs in the form key=value "key" can be any key used in a specification for "sockaddr_passive", and "value" is interpreted as a path, number or a string (regex), depending on the key. "port" and "path" keys take literal values. "family" and "type" keys take regex values, which match against the family/type names (using "string_to_sock" and "string_to_family") and are replaced with the integer values internally. Other keys treat the value as a string/regex to match against. The keys can be used repeatedly within multiple fields. For example that means the following will match interfaces eth0, eth1 and lo. in=>eth0,port=1000,in='lo|eth1' Only the first "=" within a field is split. this allows the data field itself to take more key value pairs: eg: data=key1=value,data=key2=another data=ca=ca_path.pem,data=key=private.pem NOTE Because repeat "data" keys can be used, the specification generated from "parse_passive_spec" will contain a "data" key with an array as its value. For example, the following parse a "sockaddr_passive" specification which would match SOCK_STREAM sockets, for both AF_INET and AF_INET6 families, on all available interfaces. family=INET,type=STREAM #Full key name f=INET,t=STREAM #Shortest unique string for keys The special case of a field not in key value format (i.e. with out a '='), is interpreted as the plack compatible listen switch argument. HOST:PORT #INET/INET6 address and port :PORT #wildcard address and port PATH #UNIX socket path The "HOST" portion is assinged to the "address" field. The "PORT" portion is assigned to the "port" field. If a "PORT" is specified without a "HOST", then the "address" field is set to "["0.0.0.0", "::"]" which disables interface matching, but will listen on all INET addresses. NOTE This behaviour may change in later versions, as "::" supports both INET and INET6. NOTE to specify an IPv6 literal on the command line, it is contained in a pair of [] and will need to be escaped or quoted in the shell socket socket $socket, $domain_or_addr, $type, $proto example: die "$!" unless socket my $socket, AF_INET, SOCK_STREAM,0; die "$!" unless socket my $socket, $sockaddr, SOCK_STREAM,0; A wrapper around "CORE::socket". It checks if the "DOMAIN" is a number. If so, it simply calls "CORE::socket" with the supplied arguments. Otherwise it assumes "DOMAIN" is a packed sockaddr structure and extracts the domain/family field using "sockaddr_family". This value is then used as the "DOMAIN" value in a call to "CORE::socket". Return values are as per "CORE::socket". Please refer to "perldoc -f socket" for more. has_IPv4_interface has_IPv4_interface; Returns true if at least one IPv4 interface was found. False otherwise. has_IPv6_interface has_IPv6_interface; Returns true if at least one IPv6 interface was found. False otherwise. EXAMPLES Please checkout 'cli.pl' in the examples directory of this distribution. It demonstrates many of the features of this module by using the "sockaddr_passive", "parse_passive_spec", "family_to_string" and "sock_to_string" functions. It requires "Text::Table" in addition to this module. It takes user input from the command line using one or more "-l" parameters via Getopt::Long. These are parsed into passive specifications, which are then executed to generate list of passive structures matching the specification. The results are converted into nice text table output. The following shows the example outputs running this program with different inputs. Run1 Any interface, AF_INET6 only, stream or datagram on port 1000: perl examples/cli.pl -l '[::]':1000 Interface Address Family Group Port Path Type Data :: :: AF_INET6 UNSPECIFIED 1000 SOCK_STREAM :: :: AF_INET6 UNSPECIFIED 1000 SOCK_DGRAM Run2 Any interface, AF_INET only, stream or datagram on port 1000: ->perl examples/cli.pl -l 0.0.0.0:1000 Interface Address Family Group Port Path Type Data 0.0.0.0 0.0.0.0 AF_INET PRIVATE 1000 SOCK_STREAM 0.0.0.0 0.0.0.0 AF_INET PRIVATE 1000 SOCK_DGRAM Run3 Any interface, AF_INET only, stream or datagram on port 1000, with data: perl examples/cli.pl -l 0.0.0.0:1000,data='ca_path=ca_path.pem;key=key_path' Interface Address Family Group Port Path Type Data 0.0.0.0 0.0.0.0 AF_INET PRIVATE 1000 SOCK_STREAM ca_path=ca_path.pem;key=key_path 0.0.0.0 0.0.0.0 AF_INET PRIVATE 1000 SOCK_DGRAM ca_path=ca_path.pem;key=key_path Run4 On interface en0, port 1000, stream or datagram types and only private or link local addresses: perl examples/cli.pl -l interface=en0,port=1000,group='pri|link' Interface Address Family Group Port Path Type Data en0 192.168.1.103 AF_INET PRIVATE 1000 SOCK_STREAM en0 192.168.1.103 AF_INET PRIVATE 1000 SOCK_DGRAM en0 fe80::1086:a38e:8f5d:38e2 AF_INET6 LINK-LOCAL-UNICAST 1000 SOCK_STREAM en0 fe80::1086:a38e:8f5d:38e2 AF_INET6 LINK-LOCAL-UNICAST 1000 SOCK_DGRAM Run5 On interface en0,lo and unix, port 1000, path mypath.sock, and stream type only perl examples/cli.pl -l interface='en0|lo|unix',port=1000,path=mypath.sock,type=stream Interface Address Family Group Port Path Type Data en0 192.168.1.103 AF_INET PRIVATE 1000 SOCK_STREAM en0 fe80::1086:a38e:8f5d:38e2 AF_INET6 LINK-LOCAL-UNICAST 1000 SOCK_STREAM lo0 fe80::1 AF_INET6 LINK-LOCAL-UNICAST 1000 SOCK_STREAM unix mypath.sock_S AF_UNIX UNIX mypath.sock_S SOCK_STREAM Run6 Shortened keys. Multiple listeners on command line: First specification: Interface en0, port 1000, only AF_INET and stream Second specification: Interface lo or unix, AF_INET or UNIX types, po 2000 for inet and path test.sock for unix, datagram type only perl examples/cli.pl -l i='en0',po=1000,f='inet$',t=stream -l i='lo|unix',f='inet$|unix',po=2000,pa="test.sock",t=dgram Interface Address Family Group Port Path Type Data en0 192.168.1.103 AF_INET PRIVATE 1000 SOCK_STREAM lo0 127.0.0.1 AF_INET LOOPBACK 2000 SOCK_DGRAM unix test.sock_D AF_UNIX UNIX test.sock_D SOCK_DGRAM RUN7 Interface en0 and lo, port 1010, private or link local group, multiple data keys examples/cli.pl -l in=en0,in=lo,po=1010,gr='PRI|link',data=ca=test,data=key=path Interface Address Family Group Port Path Type Data en0 192.168.1.103 AF_INET PRIVATE 1010 SOCK_STREAM ca=test,key=path en0 192.168.1.103 AF_INET PRIVATE 1010 SOCK_DGRAM ca=test,key=path en0 fe80::1086:a38e:8f5d:38e2 AF_INET6 LINK-LOCAL-UNICAST 1010 SOCK_STREAM ca=test,key=path en0 fe80::1086:a38e:8f5d:38e2 AF_INET6 LINK-LOCAL-UNICAST 1010 SOCK_DGRAM ca=test,key=path lo0 fe80::1 AF_INET6 LINK-LOCAL-UNICAST 1010 SOCK_STREAM ca=test,key=path lo0 fe80::1 AF_INET6 LINK-LOCAL-UNICAST 1010 SOCK_DGRAM ca=test,key=path TODO Network interface queries for byte counts, rates.. etc Expand address family types support(i.e link) Network change events/notifications SEE ALSO Other modules provide network interface queries: Net::Interface seems broken at the time of writing IO::Interface works with IPv4 addressing only? AUTHOR Ruben Westerberg, REPOSITORTY and BUGS Please report any bugs via git hub: COPYRIGHT AND LICENSE Copyright (C) 2022 by Ruben Westerberg This library is free software; you can redistribute it and/or modify it under the same terms as Perl or the MIT license. DISCLAIMER OF WARRANTIES THIS PACKAGE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.