%%\input epsf
%%\def\newpage{\vfill\eject}
%%\def\vc#1{$\vcenter{#1}$}
%%\def\title#1{\hrule\vskip1mm#1\par\vskip1mm\hrule\vskip5mm}
%%\def\figure#1{\par\centerline{\epsfbox{#1}}}
%%\title{{\bf 3DPOLY.MP: DEFINITION OF REGULAR CONVEX POLYHEDRA IN METAPOST}}

%% version 1.34, 17 August 2003
%% {\bf Denis Roegel} ({\tt roegel@loria.fr})
%%
%%This package defines the five regular convex polyhedra classes and
%%must be used with the {\bf 3d} package.

if known three_d_poly_version: 
  expandafter endinput % avoids loading this package twice
fi;

message "*** 3dpoly,      v1.34 (c) D. Roegel, 17 August 2003 ***";
numeric three_d_poly_version;
three_d_poly_version=1.34;

%%Each object definition is parameterized by
%%an instance identification.

%%All polyhedra are normalized (centered on the origin and inscriptible
%%in a sphere of radius 1). 

%%The polyhedra are defined with a certain number of points and faces.
%%The points comprise both the vertices and the center of the object.

%%It might be useful to remind the Euler formula linking 
%%the number of faces $f$,
%%vertices $v$ and edges $e$ in polyhedra with no hole in dimension 3:
%%$f+v-e=2$. This can be verified in the following table:

%%\centerline{\vbox{\halign{\quad#\hfil\quad&&\quad\hfil#\quad\cr
%% \omit \hfil type\hfil&\omit\hfil faces\hfil
%%                      &\omit\hfil vertices\hfil&\omit\hfil edges\hfil\cr
%% tetrahedron&4&4&6\cr
%% cube&6&8&12\cr
%% octahedron&8&6&12\cr
%% dodecahedron&12&20&30\cr
%% icosahedron&20&12&30\cr}}}

%%For more details, see the documentation enclosed in the distribution.

%%\newpage\title{TETRAHEDRON (4 faces)\kern1cm\epsfbox{tetra.ps}}

%% Construction of a tetrahedron:

%% One face is \vc{\epsfbox{vect-fig.1}} with $h=c\sqrt{3}/2$

%% The angle $\alpha$ between two faces is given by 
%% $\sin(\alpha/2)={\displaystyle c/2\over \displaystyle c\sqrt{3}/2}=1/\sqrt3$

%% \figure{vect-fig.2}

def set_tetrahedron_points(expr inst)=
  set_point(1)(0,0,0);set_point(2)(1,0,0);
  set_point(3)(cosd(60),sind(60),0);% $60=360/6$
  sinan=1/sqrt(3);cosan=sqrt(1-sinan**2);
  an=180-2*angle((cosan,sinan));
  new_face_point(4,1,2,3,an);
  normalize_obj(inst)(1,2,3,4);
  set_point(5)(0,0,0);% center of tetrahedron
enddef;

vardef def_tetrahedron(expr inst)=
  new_obj_points(inst,5);% 4 vertices and the center
  new_obj_faces(inst,4);% 4 faces in the definition
  set_tetrahedron_points(inst);
  set_obj_face(1,"1,2,4","b4fefe");
  set_obj_face(2,"2,3,4","b49bc0");
  set_obj_face(3,"1,4,3","b4c8fe");
  set_obj_face(4,"1,3,2","b4fe40");
enddef;

%%\newpage\title{CUBE (HEXAHEDRON) (6 faces)\kern1cm\epsfbox{cube.ps}}

%%The definition of a cube is straightforward.

def set_cube_points(expr inst)=
  set_point(1)(0,0,0);
  set_point(2)(1,0,0);
  set_point(3)(1,1,0);
  set_point(4)(0,1,0);
  set_point(5)(0,0,1);
  set_point(6)(1,0,1);
  set_point(7)(1,1,1);
  set_point(8)(0,1,1);
  normalize_obj(inst)(1,7);% 1 and 7 are opposite vertices
  set_point(9)(0,0,0);% center of cube
enddef;

vardef def_cube(expr inst)=
  new_obj_points(inst,9);% 8 vertices and the center
  new_obj_faces(inst,6);% 6 faces in the definition
  set_cube_points(inst);
  set_obj_face(1,"1,2,6,5","b4fe40");
  set_obj_face(2,"2,3,7,6","45d040");
  set_obj_face(3,"4,8,7,3","45a114");
  set_obj_face(4,"1,5,8,4","45a1d4");
  set_obj_face(5,"5,6,7,8","4569d4");
  set_obj_face(6,"4,3,2,1","112da1");
enddef;


%%\newpage\title{OCTAHEDRON (8 faces)\kern1cm\epsfbox{octa.ps}}

%% A section of a pyramid is: \vc{\epsfbox{vect-fig.3}}

%% The height of this pyramid is given 
%% by $H^2={(c\sqrt3/2)}^2-{(c/2)}^2=c^2/2$, hence $H=c/\sqrt2$

def set_octahedron_points(expr inst)=
  set_point(1)(0,0,0);
  set_point(2)(1,0,0);
  set_point(3)(1,1,0);
  set_point(4)(0,1,0);
  set_point(5)(.5,.5,1/sqrt(2));
  set_point(6)(.5,.5,-1/sqrt(2));
  normalize_obj(inst)(5,6);% 5 and 6 are opposite vertices
  set_point(7)(0,0,0);% center of octahedron
enddef;

vardef def_octahedron(expr inst)=
  new_obj_points(inst,7);% 6 vertices and the center
  new_obj_faces(inst,8);% 8 faces in the definition
  set_octahedron_points(inst);
  set_obj_face(1,"1,2,5","b4fefe");
  set_obj_face(2,"2,3,5","45d040");
  set_obj_face(3,"3,4,5","4569d4");
  set_obj_face(4,"4,1,5","b49bc0");
  set_obj_face(5,"6,1,4","45a1d4");
  set_obj_face(6,"6,2,1","b4c8fe");
  set_obj_face(7,"6,3,2","b49b49");
  set_obj_face(8,"6,4,3","112da1");
enddef;


%%\newpage\title{DODECAHEDRON (12 faces)\kern1cm\epsfbox{dodeca.ps}}

%% Two adjacent faces (pentagons) of the dodecahedron are as follows:
%%\figure{vect-fig.13}
%% The angle between the faces is the angle between $\overrightarrow{OA}$
%% and $\overrightarrow{OB}$.
%% $OA=OB=d_3$ as defined in \figure{vect-fig.14}
%% $d_1=2r\sin(\pi/5)$, $d_2=2r\sin(2\pi/5)$ 
%% and $d_3=d_1\sin(2\pi/5)=2r\sin(\pi/5)\sin(2\pi/5)$
%%
%% The angle $\alpha$ is defined by the following conditions:
%% \figure{vect-fig.15}
%% Thus $d_2^2=d_3^2+d_3^2-2d_3^2\cos\alpha$, which leads to
%% $\cos\alpha=1-{\displaystyle d_2^2\over\displaystyle2d_3^2}
%%      =-{\displaystyle\cos(2\pi/5)\over\displaystyle2\sin^2(\pi/5)}$
%%\newpage

def set_dodecahedron_points(expr inst)=
  new_points(fc)(10);% face centers
  set_point_(fc1,0,0,0);set_point(1)(1,0,0);
  set_point(2)(cosd(72),sind(72),0);% 72=360/5
  rotate_in_plane(3,fc1,1,2);
  rotate_in_plane(4,fc1,2,3);
  rotate_in_plane(5,fc1,3,4);
  cosan=-cosd(72)/(2*sind(36)*sind(36));sinan=sqrt(1-cosan**2);
  an=180-angle((cosan,sinan));
  new_abs_face_point(fc2,fc1,1,2,an);
  new_abs_face_point(fc3,fc1,2,3,an);
  new_abs_face_point(fc4,fc1,3,4,an);
  new_abs_face_point(fc5,fc1,4,5,an);
  new_abs_face_point(fc6,fc1,5,1,an);
  rotate_in_plane(6,fc2,2,1);
  rotate_in_plane(7,fc2,1,6);
  rotate_in_plane(8,fc2,6,7);
  rotate_in_plane(9,fc3,2,8);
  rotate_in_plane(10,fc3,8,9);
  rotate_in_plane(11,fc4,3,10);
  rotate_in_plane(12,fc4,10,11);
  rotate_in_plane(13,fc5,4,12);
  rotate_in_plane(14,fc5,12,13);
  rotate_in_plane(15,fc6,5,14);
  new_abs_face_point(fc7,fc2,6,7,an);
  new_abs_face_point(fc8,fc3,8,9,an);
  new_abs_face_point(fc9,fc4,10,11,an);
  new_abs_face_point(fc10,fc5,12,13,an);
  rotate_in_plane(16,fc7,6,15);
  rotate_in_plane(17,fc7,15,16);
  rotate_in_plane(18,fc8,7,17);
  rotate_in_plane(19,fc9,9,18);
  rotate_in_plane(20,fc10,11,19);   
  normalize_obj(inst)(2,20);% opposite vertices
  set_point(21)(0,0,0);% center of dodecahedron
  free_points(fc)(10);
enddef;
%%\newpage
vardef def_dodecahedron(expr inst)=
  save cosan,sinan,an;
  new_obj_points(inst,21);% 21 points in the definition
  new_obj_faces(inst,12);% 12 faces in the definition
  set_dodecahedron_points(inst);
  set_obj_face(1,"5,4,3,2,1","ff0fa1");
  set_obj_face(2,"8,7,6,1,2","b40000");
  set_obj_face(3,"10,9,8,2,3","b49b49");
  set_obj_face(4,"12,11,10,3,4","b49bc0");
  set_obj_face(5,"14,13,12,4,5","b4c8fe");
  set_obj_face(6,"6,15,14,5,1","b4fefe");
  set_obj_face(7,"6,7,17,16,15","b4fe40");
  set_obj_face(8,"8,9,18,17,7","45d040");
  set_obj_face(9,"10,11,19,18,9","45a114");
  set_obj_face(10,"11,12,13,20,19","45a1d4");
  set_obj_face(11,"14,15,16,20,13","4569d4");
  set_obj_face(12,"16,17,18,19,20","112da1");
enddef;

%%\newpage\title{ICOSAHEDRON (20 faces)\kern1cm\epsfbox{icosa.ps}}

%%Two faces of an icosahedron are linked in the following way:

%% \vc{\epsfbox{vect-fig.4}} where $h=c\sqrt3/2$

%% $d$ is also a diagonal in a pentagon: \vc{\epsfbox{vect-fig.5}}

%% $c=2r\sin(\pi/5)$,
%% $d=2r\sin(2\pi/5)=2c\cos(\pi/5)$

%% The angle between two faces is computed as follows: 
%% \vc{\epsfbox{vect-fig.6}}

%% We have ${(2\cos(\pi/5))}^2=2{(\sqrt3/2)}^2-2{(\sqrt3/2)}^2\cos\alpha$

%% Thus $cos\alpha=1-{8\over3}\cos^2(\pi/5)$
%%\newpage

def set_icosahedron_points(expr inst)=
  set_point(1)(0,0,0);set_point(2)(1,0,0);
  set_point(3)(cosd(60),sind(60),0);% 60=360/6
  cosan=1-8/3*cosd(36)*cosd(36);sinan=sqrt(1-cosan**2);
  an=180-angle((cosan,sinan));
  new_face_point(4,1,2,3,an);
  new_face_point(5,2,3,1,an);
  new_face_point(6,3,1,2,an);
  new_face_point(7,2,4,3,an);
  new_face_point(8,3,5,1,an);
  new_face_point(9,1,6,2,an);
  new_face_point(10,3,4,7,an);
  new_face_point(11,3,7,5,an);
  new_face_point(12,1,8,6,an);
  normalize_obj(inst)(1,10);% opposite vertices
  set_point(13)(0,0,0);% center of icosahedron
enddef;

vardef def_icosahedron(expr inst)=
  save cosan,sinan,an;
  new_obj_points(inst,13);% 12 vertices and the center
  new_obj_faces(inst,20);% 20 faces in the definition
  set_icosahedron_points(inst);
  set_obj_face(1,"3,2,1","b40000");
  set_obj_face(2,"2,3,4","ff0fa1");
  set_obj_face(3,"3,7,4","b49b49");
  set_obj_face(4,"3,5,7","b49bc0");
  set_obj_face(5,"3,1,5","b4c8fe");
  set_obj_face(6,"1,8,5","b4fefe");
  set_obj_face(7,"1,6,8","b4fe40");
  set_obj_face(8,"1,2,6","45d040");
  set_obj_face(9,"2,9,6","45a114");
  set_obj_face(10,"2,4,9","45a1d4");
  set_obj_face(11,"9,4,10","4569d4");
  set_obj_face(12,"4,7,10","112da1");
  set_obj_face(13,"7,5,11","b4fefe");
  set_obj_face(14,"5,8,11","b49bc0");
  set_obj_face(15,"8,6,12","45a114");
  set_obj_face(16,"6,9,12","b49b49");
  set_obj_face(17,"8,12,11","b40000");
  set_obj_face(18,"7,11,10","45a1d4");
  set_obj_face(19,"12,10,11","b4c8fe");
  set_obj_face(20,"9,10,12","ff0fa1");
enddef;

%%\newpage\title{General draw functions}

def draw_polyhedron(expr name)=
  draw_faces(name);
enddef;

let draw_tetrahedron=draw_polyhedron;
let draw_cube=draw_polyhedron;
let draw_octahedron=draw_polyhedron;
let draw_dodecahedron=draw_polyhedron;
let draw_icosahedron=draw_polyhedron;

let new_poly=assign_obj;

endinput